Filter
Top Products
MAIN MENU
PICTURE
SOUND
INSTALL
FEATURES
Position Access
Exit
20
ded in the transmission. In the absence of this signalling data (as can often be the case) a de-
fault format must be used. This default format can be selected by the ZOOM AUTO function.
LANGUAGE
This can be changed at any time by the user in the LANGUAGE menu (accessed via the FEA-
TURES menu).
Main Menu
All menus are removed within 60 seconds if you don t press any button. Press the remote
control MENU button (A19) to
display the main menu. Then,
you have the choice between
several sub-menus: If you want
to Exit the main menu, press
the MENU button (A19) a sec-
ond time.
- To select one of the sub-menus, use the remote control
CURSOR UP (A6), DOWN (A21) buttons.
- To enter the selected sub-menu, press the remote control OK button (A18).
Remark:
In AV/S-VIDEO mode, the INSTALL menu is not available and will not be selectable.
How to use the sub-menus
The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.
- Adjust the function using :
Menus Description
- Select the
desired Position
by using the
remote control
CURSOR UP
(A6) or DOWN
(A21) buttons.
- The remote
control CURSOR
LEFT (A7) or
RIGHT (A20)
buttons if you
want to modify
the function
value.
- The remote
control
NUMBER 0...9
buttons (A3) to
enter directly
new data.
- Store (if
needed) by
pressing the
remote control
OK button
(A18).
- Then Exit to
main menu by
pressing the
MENU button
(A19).