Daewoo DLP-42C1 Flat Panel Television User Manual


 
6
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the user’s own safety, and the proper operation of the product.
CAUTION
Ignoring or disregarding the contents of this section and improper
operation of the product may result in the person’s death or seri-
ous injury.
Please keep the user’s manual in a safe place for future reference.
Do not put volatile substance-such as benzene,
naphtha- near the product since it may cause
a change in the product’s colour.
Do not spill water or drop the remote controller
since it may be a cause of malfunctioning.
Do not view the TV too closely since it may
cause damage in your eyesight.
Refer servicing to qualified service personnel
for cleaning at least once a year since dust in-
side the TV set may be a result or fire and mal-
functioning of the product.
Do not cover the top of the television set. Venti-
lation will be prevented, and it may be a cause of
fire if the product is internally overheated.
The product should be situated away from any
heat source-such as radiators, heat registers,
stoves, or other products that produce heat.
Do not put on any heavy item on the power
cord since it may result in fire or hazardous
electric shock if the cord is damaged.
Please be advised of electric wires and cables
when installing the antenna. It may be a cause
of hazardous electric shock and fire if the an-
tenna touches or falls on the electric wire; thus,
it must be installed firmly, and far away from
the cables.
Unplug the power from the outlet and all the
related connections from the unit to prevent
electric shock. At least two people must work
together to move the TV set when transport-
ing to prevent the TV from falling, and conse-
quently, any serious injury or damage.
Do not touch the power cord with moistur-
ized or wet hands when plugging to or unplug-
ging from the outlet since it may be a cause
of electric shock.
Do not expose the product to a dusty or mois-
turized place since it may be a cause of mal-
functioning.