Filter
Top Products
4-3. Vertical Size Adjustment
•
Select “V.SIZE” item, adjust “V.SIZE” data value to proper vertical size as follows.
•
You can see the OSD as shown in below.
4-1. Horizontal SHIFT Adjustment
•
Select H.SHIFT item, adjust H.SHIFT data value to obtain proper horizontal centering of the
internal cross pattern at the left and right of the screen.
4-2. Vertical SHIFT Adjustment
•
Select V.SHIFT item, adjust V.SHIFT data value to center the raster properly on thescreen.
GEOMETRY
H. SHIFT 09
V. SHIFT 02
V. SIZE 38
VBLK SHIFT 03
VBLK SHIFT ON NO
NO SD POWER OFF NO
MOVE ADJUST RECALL:SET
10
ALIGNMENT INSTRUCTIONS
4) GEOMETRIC ADJUSTMENTS (S6)
•
Enter the service mode and select service adjustment S6.