Filter
Top Products
-10-
ALIGNMENT INSTRUCTION
2) FOCUS ADJUSTMENT
•
Turn in a local station and adjust the Focus Control knob (located on FBT) for best picture
details at high light condition.
3) GEOMETRIC ADJUSTMENTS (S6)
•
Select service adjustment S6
•
You can see the OSD as shown in below.
3-1. Horizontal Position Adjustment
•
Select H-PHASE item, adjust H-PHASE data value to obtain proper horizontal centering of the
internal cross pattern at the left and right of the screen.
3-2. Vertical Position Adjustment
•
Select V-POSI item, adjust V-POSI data value to center the raster properly on the screen.
2. ASSEMBLY ADJUSTMENTS
1) SCREEN ADJUSTMENT (S2)
•
Enter the service mode and select service adjustment S2.
•
You can see the one horizontal line on the screen.
•
Adjust the Screen Control Volume (located on FBT) so that the horizontal line onscreen may be
disappeared.
•
Press the volume up or down button to exit in the screen adjustment mode.
IN THE SCREEN ADJUSTMENT MODE, DONT PRESS OTHER BUTTONS EXCEPT VOLUME UP OR DOWN BUTTON.
CAUTION
V-SIZE
V-POSI
H-PHASE
H-SIZE
V-LIN
V-S
HBST
TILT
P-PARA
H-SYM
H-COR
HBSO
504
549
984
984
358
379
1168
36
1060
269
237
260