-11-
ALIGNMENT INSTRUCTION
3-3. Vertical Size Adjustment
•
Select “V.SIZE” item, adjust “V.SIZE” data value to proper vertical size as follows.
4) WHITE BALANCE ADJUSTMENT(S8)
•
Receive a good local channel.
•
Enter the service mode and select service adjustment S8.
•
You can see the OSD as shown in below.
•
Using volume up or volume down, adjust service adjustment data of RD/GD/BD and RB/GB/BB until a good gray
scale with normal whites is obtained.ALIGNMENT INSTRUCTIONS
•
Press the DISPLAY button to memorize the data.
5) DIGITAL PRESET(D.P) ADJUSTMENTS(S9)
SUBBRIGHTNESS ADJUSTMENT
•
Receive a good local channel.
•
Enter the service mode and select service adjustment S9.
•
You can see the OSD as shown in below.
RD 700
GD 700
BD 700
RB 350
GB 350
BB 350
MOVE ADJUST RECALL : SET
DP-BRI 145
DP-CONT 8
DP-TINT 170
DP-COL 0
DP-OVPK 4
DP-UNPK 2
BRI-SET 75
MOVE ADJUST RECALL : SET