Filter
Top Products
25
Chapter 6 :
Adjusting the Sound
CHAPTER
6
Adjusting the Sound
Selecting stereo/SAP
The MTS(Multi-channel TV Sound) provides for an extra sound channel. So MTS feature allows
you to improve your TV viewing with high fidelity stereo sound. SAP(Second Audio Program) used
to transmit a second language of other audio information. If your TV receives a stereo sound(or
SAP) broadcast, when the TV is turned on, select other channel or press the RECALL button on the
remote control the word “Stereo”(or “SAP”) is displayed on the screen.
Listening to stereo sound
1
With the TV turned on, press the MENU button until “Audio” menu will be displayed.
2
Use the WCHV buttons select “Audio Mode” item.
3
Press the CVOLB buttons repeatedly until: “Stereo” is displayed.
4
Press the button twice or wait few seconds to return to normal TV viewing.
5
Your setting will remain intact until you change it. Your TV will then automatically reproduce
either stereo or monaural sound, whichever is broadcast.
Listening to second Language
1
Follow steps 1~2 in “Listening to stereo sound” above.
2
Press the CVOLB buttons repeatedly until: “SAP” is displayed.
3
Press the MENU button twice or wait few seconds to return to normal TV viewing.
4
If a SAP broadcast is received, you will hear only the second language from the speaker.
Select
Audio
Audio Mode: Mono
Bass
Treble
Balance
Adjust Exit
1~2
Select
Audio
Audio Mode: Stereo
Bass
Treble
Balance
Adjust Exit
3
Select
Audio
Audio Mode: SAP
Bass
Treble
Balance
Adjust Exit