Filter
Top Products
Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, If you’ve
connected another component to your TV(such as a VCR) using the Video/Audio input, you will
want to be able to view the signal from the component.
To do this, you will need to switch from the ‘ TV ’ input to the ‘Line1’, ‘Line2’, ‘Line3’, ‘S-Video’
Input, as follows.
1
With the TV on, press the MENU button twice, then “ Set-Up ” menu will appear.
2
Use the WCHV buttons to select “ Input ”.
3
Press the CVOLB buttons to change from ‘ TV ’ to ‘Line1’, ‘Line2’, ‘Line3’, ‘S-Video’.
4
Wait 10 seconds, or press the MENU button to return to normal TV viewing.
Note
When you watch TV in S-video mode, Audio jack must be connected to AV2 terminal.
12
Chapter 3:
Operating Your TV
Select
Set-Up
Language : English
Input : Line2
Adjust Next
3-2
Select
Set-Up
Language : English
Input : Line1
Adjust Next
3-1
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input : TV
Adjust Next
2
Select
Set-Up
Language : English
Input : S-Video
Adjust Next
3-4
Select
Set-Up
Language : English
Input : Line3
Adjust Next
3-3