Daewoo DV-900 DVD Player User Manual


 
34
FUNCTION SETTING
CAPTIONS
The hidden subtitle is shown or turn off.
SCREEN SAVER
Start the screen saver, the screen saver image appears when the unit stops or
the image is motionless for a few seconds. This saver can keep the screen from
being damaged.
DIGITAL OUT
OFF
No signal is output from the coaxial, optical port.
Bitstream
Select this when the DVD player is connected with a power amplifier through
optical or coaxial port. Please refer to the page 14. when a Dolby Digital DVD,
DTS DVD or MPEG DVD is played, select this, the coaxial or optical port will
output in the corresponding digital format (source code). The power amplifier
to be connected must have Dolby Digital, DTS and MPEG DVD is played, the
optical or coaxial port will output in PCM 2-channel format.
PCM
Select this when the DVD player is connected with a TV or a power amplifier
through audio cord.
Audio
Down Mix
Select Down Mix mode to LT/RT or Stereo
DUAL MONO
This is the output mode of the L and R signals of the set audio output. If it is set to
"MIX MONO", the function only works when the DVD being played is 2.0-channel.