Filter
Top Products
SLEEP FUNCTION
PICTURE CONTROL
You can select three pictures settings, by using the remote control NORMAL button (A17) :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: brightness, contrast, colour, sharpness, use the Picture menu.
If an NTSC signal is received, then a tint adjustment will also be available.
The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP button (A4), you can enter one
of the following settings :
OFF >20 min > 40 min >60 min >80 min >100 min >120 min >OFF.
The SLEEP time remaining (before TV turn-off) can be seen again at any time by one touch on the remote control SLEEP button (A4). A second touch (while the
status display is active) will modify the SLEEP time remaining.
Use the remote control RECALL button (A16) to display (for 4 seconds only) program status information. This display appears also after a program selection
or after switching on the TV set.
PROGRAM STATUS DISPLAY
PRO1 TF1
STEREO
11:11
Channel name
Clock
Channel number
Sound transmission Mode :
Displayed in red colour only if
forced to mono by MODE
button (A14)
PRO1 TF1
NORMAL I
11:11
PRO1 TF1
NORMAL II
11:11
PRO1 TF1
FAVOURITE
11:11
PRO1 TF1
STEREO
SLEEP 18
Remaining time (minutes)
before TV set switches off
FORMAT SELECTION
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK SETTING, WAKE UP, NOISE REDUCTION
If AUTO is chosen, the most appropriate
format will be selected (subject to availability
of broadcast wide screen signal information).
Otherwise, the preferred mode of the user can
be forced by repeated pressing of the remote
control ZOOM button (A15):
Television Format 16:9
Television models DWX-28W, DWF-28W.
The following picture formats are available:
AUTO> 4:3 > 14:9 > ZOOM 14:9 > ZOOM 16:9 >
FULL SCREEN > PANORAMA > AUTO.
When viewing an external signal in RGB mode, via
SCART 1 socket (C1), the following picture formats
are available:
AUTO>ZOOM 14:9>ZOOM 16:9>FULL
SCREEN>AUTO.
Television Format 4:3
Television models DTF-29, DTP-25,DTP-28.
The following picture formats are available:
AUTO> 4:3 > 16:9 > ZOOM > AUTO.
These functions are available in the Features menu (see description page 10).
LANGUAGE
This can be changed at any time by the user in the Features menu.
CHILD LOCK
Once the user has set this function to ON or OFF, it will remain in this condition until the user changes it again.
WAKE UP
The default setting for WAKE UP is in the "OFF" position. The user must enter the Features menu in order to activate this function, and after each use, the Wake
Time will be returned to the "OFF" position.
It is necessary to have set the clock (either manually or automatically) before using this function, otherwise no wake up of the TV will occur.
CLOCK SETTING
The TV will automatically attempt to set the clock at power on (with the MAIN POWER button). It takes as reference whatever is tuned to program number 1. This can
only be successful if teletext is available on this program.
If no time is captured automatically, and no time is entered manually (the clock will show - - : - -), then the TV will also try to get the time when turning on from stand-
by mode.
7
Noise Reduction (NR)
The picture noise reduction feature NR is set to the default ON position. It will remain ON (or OFF, if selected) until the user changes it again.