Filter
Top Products
Place your televideo
horizontally on a flat, steady base so that air can circulate around it for ventilation.
away from humidity and heat, magnetic fields, such as those from loudspeakers
etc., and with no heavy objects placed on top.
6
Initial
INSTALLATION
Connecting up the televideo
Fitting the remote control’s batteries
Switch off all components when connecting or disconnecting cables.
Plug the aerial cable into the “ANT” socket of the televideo.
Make sure the rating of the household mains supply matches the rating
shown on the back of the televideo.
Now plug in the mains lead.
Fit the batteries, size 1.5V AAA as shown above.
Protect your environment by returning used batteries to your dealer. Since
batteries contain toxic substances they require special disposal methods.
Make sure the batteries are always of the same type and age, and remove
them from the remote control if you are not using it for a long period.
1
Remove the battery cover
on the reverse side of the
remote control.
2
Install two barreries
(“AAA” size) into the
remote control.
3
Replace the battery
cover.
The buttons to use
are marked on the
following pages.