Filter
Top Products
REC/
PLAY
REW
FF
STAND BY
STOP/ EJECT
CHANNEL
OTR
Connecting up the video recorder
Fitting the remote control's batteries
INSTALLATION
Initial
4
Place your video
◆
horizontally on a flat, steady base so that air can circulate around it for ventilation.
◆
away from humidity and heat, magnetic fields, such as those from loudspeakers
etc., and with no heavy objects placed on top.
Switch off all components when connecting or disconnecting cables.
◆ Unplug the aerial cable from your TV and plug it into the
"ANT. IN" socket of the video.
Plug the short coaxial cable provided into the "ANT. OUT"
socket of the video and the aerial socket of the TV.
◆ Plug an A/V cable into the "A/V" socket of the video and
the A/V socket on the TV if available.
This connection will provide best picture and sound quality.
Ask your dealer for an appropriate cable if you do not have one.
Without an A/V cable, you need to follow the steps described
under "If you are not using an A/V cable" (right page and page 17).
◆ Make sure the rating of the household mains supply matches the
rating shown on the back of the video.
Now plug in the mains lead. The display of the video
should now light.
Fit the batteries as shown by
the pictures in the bay.
ANT
.
OUT
ANT
.
IN
AUDIO VIDEO
OUT
IN
1.5 V (AAA)
INDEX
/
/
00:00
12
3
4
56
7
0
8
9
PAL/SEC
T. R
AV
SP/LP
A.SEL
EJECT
TV/VCR
PR
MENU
OK
PR
110-240 V ~,
50/60 Hz
◆ Protect your environment by returning used batteries to your dealer. Since
batteries contain toxic substances they require special disposal methods.
◆ Make sure the batteries are always of the same type and age, and remove them
from the remote control if you are not using it for a long period.
The buttons to
use are marked
on the following
pages.
DV-K284/K484DY-RG/F_GB-‡»¿º 01.1.30 1:31 PM ˘ ` 4