Filter
Top Products
Menu installation
Key Process for PC mode
Press the MENU button on the Remote controller.
This will bring up the OSD.
COLOUR configures the PC display to suite your
requirements.
GAMMA reflects the level of white against black and
COLOUR TEMP is depedant on the amount of RGB (Red
Green, Blue).
9300 is BLUE orientated, 6550 is RED orientated and
USER is dependant on colour adjustment (but defaults to
GREEN).
Colour Adjust gives you the option of manually adjusting the
RGB values.
Press the MENU button on the Remote controller.
This will bring up the OSD.
PICTURE adjustments can be made to certain resolutions
that are not correctly aligned to the display.
In most cases, a H Position, V Position of 50 and a Phase of
0 together with a Clock of 100, will fit to most requirements.
Sharpness can be adjusted as well, but a value of 1 is
normal for PC desktop useage.
Press the MENU button on the Remote controller.
This will bring up the OSD.
AUTO ADJUST is a useful feature to correct H Position and
V Position manual values quickly and easily.
To achieve this, right-arrow so that NO is highlighted in
RED, then left-arrow so that YES is now highlighted in RED.
As soon as you do this, Auto Adjust will take effect. Do not
press OK or MENU. After a few seconds, YES will turn
BLACK.
Auto Adjust has now completed.
14