Daewoo SD-9500P DVD Player User Manual


 
44
About MP3, JPEG discs
Select the file to listen to (or view).
Move the cursor to desired file which you want to
listen to (or view) by pressing [ ] button
and press [ENTER] button to confirm. The selected
file will be playback.
* To disappear the directory screen, press [MENU] button in
playback or stop mode. Press [MENU] button again to make it
appear.
6
DISC: \DIR--01
..
FILEOPEN--01
FILEOPEN--02
FILEOPEN--03
FILTER MP3 ONLY
REPEAT TRACK
00:00 / 00:00
… † œ √ ENTER MENU
Play and Pause
Press the [PLAY/PAUSE] button to switch between play and pause.
Search for a track
The [SEARCH] button works on MP3/JPEG discs as well as VCD/CD audio.
* In case [SEARCH] button is pressed in playback mode, folder tree view disappears and search bar is displayed.
To stop playback
Press the [STOP ] button.
To skip to the next or previous file
Press the [ NEXT] button of the remote control briefly while playing, to skip ahead to
the beginning of the next file. Each time you press the button consecutively, the beginning of
the next file is located and played back.
• Press the [ PREV (Previous)] button of the remote control briefly while playing, to skip
back to the beginning of the previous file. Each time you press the button consecutively, the
beginning of the previous file is located and played back.
The ability of this unit to read MP3 discs is dependent on the followings:
The Bit Rate must be within 64-256 kbps.
The maximum number of directories should not exceed 32.
The maximum depth level of directories should not exceed 4.
In case that the file is recorded with the variable bit rate (VBR) in one file (Example: 54-256kbps) the
sound breaking may occur during the playback.
File names should be named using 8 or fewer letters and/or numbers, and must incorporate the
“MP3” file extension. EXAMPLE:
********
. MP3 where each
*
is a letter or number.
Use only letters and/ or numbers in file names. If you use special characters, the file and/ or folder
names may not be displayed correctly on the on-screen display.
The ability of this unit to read JPEG discs is dependent on the following:
If you press [PLAY] button instead of [ENTER] in JPEG image, sliding show will begin at the
current image.
To stop slide show, press [STOP] button. By pressing [STOP] and [PLAY] button, you can start
slide show from the first JPEG image.
Caution
Try to avoid the use the CD-RW(Rewritable) disc if possible because it can not be played back
according to the recording format.
The CD-R must be recorded with the standard format because it can not be played back according to
the recording format.
The CD-R should be written using the ‘disc at once’ method.
The disc which is made with ISO 9660 format can be played back.