Filter
Top Products
Setting Up Your TV 13
FILE LOCATION: C:\Documents and Settings\solinak\Ƈ¦±\OM update\ch2e.fm
DELL CONFIDENTIAL – PRELIMINARY 10/8/04 – FOR PROOF ONLY
www.dell.com | support.dell.com
Better S-Video
The S-Video connector splits the video signal
into two signals, black-and-white and color. If
you are using the S-Video connector, you also
need to connect the audio cables. To locate
the S-Video connectors, see "Right View" on
page 6 and "Bottom View" on page 7.
Best Component (YPbPr)
The component connectors splits the video
signal into three signals, two color and one
black-and-white. If you are using the
component connectors, you also need to
connect the audio cables. To locate the
component connectors, see "Bottom View" on
page 7.
Excellent DVI
DVI receives the image data in digital format
so that the TV does not need to perform an
analog-to-digital conversion, as with the
input types described above. Because the TV
uses digital data to display the image, DVI
provides the highest quality input, although
actual results depend on the video source
(DVD player, DVR, etc.). To locate the
connector see "Bottom View" on page 7.
Excellent HDMI
HDMI (High Definition Multimedia
Interface) assures that the best video signal is
always sent from source (HDTV signal, DVD
player) to the TV. This is achieved by allowing
uncompressed video and multi-channel audio
data to be sent to the display device through
a single cable. To locate the connector see
"Bottom View" on page 7.
Quality Cable and connector When to Use
DZ101_eUM.book Page 13 Friday, October 8, 2004 2:25 PM