Filter
Top Products
3.2 - Installing the KeyMaster.
Seven wires have to be soldered onto the PCB board in the front,
the last two has to be connected onto the powersupply and SCART
PCB board.
Fig. 2
à Connect the white wire onto the
connection R628 and R632.
à Connect the blue wire onto the
connection R629 and R633.
à Connect the orange wire onto the
connection R627 and R631
à Connect the yellow wire onto the
connection R630 and R634.
à Connect the brown onto the solder-
pad as shown in fig.3.
Fig. 3