Filter
Top Products
- 11 -
EVENT PARAMETER function example *RES.
ZM ON MAIN-ZONE ON/OFF change ZMON<CR>
OFF ZMOFF<CR>
Z1 PHONO MULTI ZONE -3 source change Z1PHONO<CR>
| ---The name of PARAMETER is |
CDR/TAPE1 the same as that of the time of SI COMMAND. Z1MD/TAPE2<CR>
SOURCE MULTI ZONE -3 mode cancel Z1SOURCE<CR>
** MULTI ZONE -3 VOLUME change , **:00 to 99 by ASCII Z180<CR>
?
98 = +18dB(MAX)
80 = 0dB
10 = -70dB
99 = ---(MIN)
ON MULTI ZONE -3 ON/OFF change Z1ON<CR>
?
OFF Z1OFF<CR>
?
Z2 PHONO MULTI ZONE -2 source change Z2PHONO<CR>
| ---The name of PARAMETER is |
CD/TAPE1 the same as that of the time of SI COMMAND. Z2MD/TAPE2<CR>
SOURCE MULTI ZONE -2 mode cancel Z2SOURCE<CR>
** MULTI ZONE -2 VOLUME change , **:00 to 99 by ASCII Z180<CR>
?
98 = +18dB(MAX)
80 = 0dB
10 = -70dB
99 = ---(MIN)
ON MULTI ZONE -2 ON/OFF change Z2ON<CR>
?
OFF Z2OFF<CR>
?
SR PHONO REC SELECT source change SRPHONO<CR>
| ---The name of PARAMETER is |
CD/TAPE1 the same as that of the time of SI COMMAND. SRMD/TAPE2<CR>
SOURCE REC SELECT mode cancel SRSOURCE<CR>