Filter
Top Products
Press the A-B REPEAT button
at your chosen starting point.
• A- appears briefly on the
TV screen.
Press the A-B REPEAT button
again at your chosen end
point.
• A-B appears briefly on the
TV screen, and the repeat sequence begins.
To exit the sequence, press
the A-B REPEAT button.
NOTES:
• The A-B Repeat section can only be set within the cur-
rent title (for DVD-Video), or current track (for DVD-
Audio, Audio CD, Super Audio CD).
• A-B Repeat is not available with some scenes on DVD.
•To cancel the A point which was set, press the CLEAR
button.
• A-B Repeat playback does not function during title,
chapter, track, group or all repeat playback.
3
2
1
–
19
–
EN
English
DISC PLAYBACK
A-B REPEAT
Super
Audio CD
CDDVD-ADVD-V
A -
A - B
OFF
Program Playback
To activate Repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
Super
Audio CD
CD
REPEAT TRACK / GROUP / ALL
To activate Repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
DVD-V
NOTES:
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
Repeat
REPEAT TITLE / CHAPTER
• The REPEAT button is available only during playback.
NOTES:
• In the track repeat, the repeat setting will be cleared
when moving to other track.
• Repeat playback does not function during A-B repeat
playback.
WMAJPEGMP3DVD-A
CHAPTER TITLEOFF
(current chapter repeat) (current title repeat)
(repeat
off)
TRACK ALLOFF
(current track repeat) (entire disc repeat)
(repeat
off)
TRACK ALL
OFF
(current track
repeat)
(
entire disc
repeat)
(repeat
off)
GROUP
(current folder
repeat)
NOTES:
• In the track or group repeat, the repeat setting will be
cleared when moving to other track or group.
•For DVD-Audio, ALL repeat is effective only when all
groups are being played back.
In stop mode, press the MODE button.
• The program screen will appear.
Press the Cursor buttons
(
▲ or ▼) to select a track, then
press the
ENTER button.
•
Press the CLEAR button to erase
the most recently entered track.
Press the PLAY button to start programmed
playback.
3
2
1
Super
Audio CD
CD
CD-DA TOTAL 0:03:30
PROGRAM
1 3:30
T
T
T
T
T
T
T
T
T
2 4:30
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
1 3:30
1 3:30
1/2
1/1
When the disc reaches the point you want to
remember, press the
ENTER button.
• The title or track and elapsed playback time will appear
in the TV screen.
To return to the Marker later, press the SEARCH
MODE
button repeatedly during playback and the
Cursor buttons (s or B) button to choose a
desired marker, then press the
ENTER button.
Press the SEARCH MODE or RETURN button to exit.
NOTES:
• Opening the disc tray, turning off the power or selecting
AC at step and pressing the ENTER button will
erase all Markers.
•To clear a marker, using the Cursor buttons (s or B),
position the cursor on to the marker number to be
cleared and press the
CLEAR button.
•You can mark up to 10 points.
2
5
4
3
This function allows you to program a playback order of
DVD-Audio, Audio CD, Super Audio CD, MP3, JPEG, or
WMA in a desired sequence.
In stop mode, press the MODE
button repeatedly until the pro-
gram screen appears.
•The group selection screen will
appear.
Press the Cursor buttons
(
▲ or ▼) to select a group, then press the ENTER
button.
• The track selection screen will be displayed.
•It takes approximately five seconds until the track
selection screen appears.
Press the Cursor buttons (▲ or ▼) to select a
track, then press the
ENTER button.
• Press the Cursor button (s) button to go back to the
group selection screen from the track selection screen.
Press the PLAY button to play back the pro-
grammed tracks.
4
3
2
1
DVD-A
DVD-AUDIO TOTAL 0:00:00
PROGRAM
1 1:02:25
G
G
G
2 1:03:30
ALL CLEAR
1 1:02:25
1/1
1/1