Filter
Top Products
–
18
–
EN
This shuffles the playing order of tracks instead of playback
in the original sequence.
In stop mode, press the RAN-
DOM or MODE button twice
when a single disc in the disc
tray, or press three times when
more than two discs in the disc
tray.
•
RANDOM screen appears
.
Press the PLAY button to start random playback.
NOTES:
• If you wish to repeat the current track in the random selec-
tion, press the REPEAT button repeatedly until TRACK
appears during playback. If you wish to repeat the entire
random selection press the REPEAT button repeatedly
until DISC appears during playback.
• Refer to page 20 for random playback of MP3, WMA, and
JPEG.
2
1
CD
You may determine the order in which tracks will play.
In stop mode press the MODE button.
• The PROGRAM screen will appear.
Press the cursor buttons
(▲ or ▼) to select a disc, then
press the
ENTER button.
• Press the CLEAR button to erase
the most recently entered pro-
gram.
Press the cursor buttons
(▲ or ▼) to select a track, then
press the
ENTER button.
• Press the CLEAR button to erase
the most recently entered pro-
gram.
Press the PLAY button to play the programmed
tracks.
NOTES:
•
While the program is being played back, the STOP button works as
follows.
•
Press the STOP button once and then the PLAY button again,
playback will restart from the point where the STOP button
was pressed. (Program continued)
•
Press the STOP button twice and then the PLAY button again,
playback will restart from the track in the usual way. (Program
cleared)
• Up to 99 programs can be entered.
• If you wish to repeat the current track in the program, press
the REPEAT button repeatedly until TRACK appears
during playback. If you wish to repeat the entire program
press the REPEAT button repeatedly until DISC
appears during playback.
• Refer to page 21 for program playback of MP3, WMA, and
JPEG.
4
3
2
1
CD
PLAYING A DISC
A-B REPEAT
Press the A-B REPEAT button
at your chosen starting point.
• A- appears briefly on the TV
screen.
Press the A-B REPEAT button
again at your chosen end point.
• A-B appears briefly on the TV
screen, and the repeat sequence
begins.
To exit the sequence, press the
A-B REPEAT button.
NOTES:
• The A-B repeat section can only be set within the current
title (for DVDs), or current track (for audio CDs).
• A-B Repeat is not available with some scenes in DVD.
•
To cancel the A point which was set, press the CLEAR button.
• A-B Repeat playback does not function during title, chap-
ter, track or all repeat playback.
3
2
1
CDDVD-V
Random Playback
A -
A - B
OFF
DISC
PROGRAM
CD
[
AUDIO
]
CD
[
AUDIO
]
CD
[
AUDIO
]
CD
[
AUDIO
]
CD
[
AUDIO
]
CD
[
AUDIO
]
1/ 1
CD [AUDIO]
RANDOM
RANDOM PROGRAM
--no indication--
Program
TRACK DISC
OFF
(current track
repeat)
(
entire disc
repeat)
(repeat off)
GROUP
(current folder
repeat)
To activate the repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
CD
REPEAT TRACK
NOTES:
•
The REPEAT setting will be cleared when moving to other track
.
•
Repeat playback does not function during A-B repeat playback.
WMAJPEGMP3
TRACK DISC
OFF
(current track repeat) (entire disc repeat)
(repeat off)
5 Disc Repeat
5 Disc Repeat
CD [AUDIO]
PROGRAM
1
2
3
4
5
6
7
1
1
1/2
1/1
E8620UD_EN.QX33 03.6.4 6:50 PM Page 18