Filter
Top Products
(6) REW
To play the recorded video backward, press the “REW” button.
There are 6 modes of REW, 1~6.To change the reverse playback speed level,
press the “REW” button again.
(7) PAUSE
To pause the video playback, press the “PAUSE” button.
Then the video display will be stopped.
To continue playback, push the play “PLAY “ button or “PAUSE” button
again to resume the previous mode.
(9) MENU/ESCAPE
To display the menu options, press the “MENU” button. Also used to Escape
from current screen to previous screen
(10) UP (c) /DOWN (d) /RIGHT (f) /LEFT (e)
To change a menu field or change the DVR configuration values, use the UP,
DOWN, LEFT, RIGHT buttons.
(11) SELECT/EDIT
This button is used to change the setup value.
(12) LED Light
There are LED lights located on the front panel (some models on the side
panel).When the LED light is ON, it indicates the following conditions:
(a) Red LED-Hard Drive is currently recording video.
(b) Green LED-Power is on.
(13) Power Button
Press Power button to shut down DVR
(14) PTZ Button
Activates buttons for Pan-Tilt-Zoom camera control
-3-