Filter
Top Products
22
© 2003 Directed Electronics, Inc.
PROBLEM SOLUTION
NO SOUND 1. Check all audio cable connectors in the system for loose or
improper connections.
2. Test system components for proper power and operation.
3. Make sure that none of the components is in MUTE mode.
NO PICTURE 1. Check all video cable connectors in the system for loose or
improper connections.
2. Test system components for proper power and operation.
3. Make sure the monitor is turned on and set to the proper
channel or input zone.
NO REMOTE FUNCTION 1. Remove any objects that may be blocking the IR eye.
2. Make sure the remote IR eye is fully plugged into the con
nector on the rear panel.
3. Test and replace any depleted remote control batteries.
PARTIAL OR NO DISPLAY 1. Inspect the disc for damage or dirt.
2. Check the monitor power and video cables for loose con
nections.
3. Check the system setting to make sure all components are
set for the same system type.
DISC TRAY WON'T OPEN 1. Wait 10 seconds before pressing the eject button again.
2. If the tray won't open with the eject button on the front
panel use the eject button on the remote control.
Troubleshooting
N83102 1-03.qxd 5/6/2003 8:33 AM Page 22