Filter
Top Products
4
FEATURES AND FUNCTIONS
Key Charts
Press this key… To…
Slide the MODE switch to the DIRECTV, AV1,
AV2 or TV positions to select the component
you want to control. A green LED under
each switch position indicates the
component being controlled.
Press TV INPUT to select the available inputs
on your TV.
NOTE: Additional setup is required to
activate the TV INPUT key. (See
instructions on page 9.)
Press FORMAT to cycle through the
resolution and screen formats. Each press
of the key cycles to the next available
format and /or resolution. (Not available on
all DIRECTV
®
Receivers.)
Press PWR to turn on/off the piece of
equipment the mode switch is set to.
Press TV POWER ON/OFF to turn the TV and
DIRECTV Receiver on or off.
(NOTE: These keys are only active after the
remote has been setup for your TV. See
page 8.)
Use these keys to control your DIRECTV
DVR or your VCR, DVD, or CD/DVD player.
On a DIRECTV DVR, enables one-
touch record for any selected program.
Replay jumps back 6 seconds and
plays video from that location. You can also
hold the button down to jump back to the
beginning.
Advance jumps ahead in a recording.
You can also hold the button down to jump
forward to the end.
Use GUIDE to display the DIRECTV
Program Guide. Press twice to see
programs by category.