Filter
Top Products
7
fiber was turned to forced mode, and “Off” for
auto-negotiation mode.
Note: Be sure the opposite end is using the same setting(forced or Auto-negotiation).
And when using two converters at the same time, the two converters MUST set to
forced mode.
Switch 2: LLR
When the switch was turned to “On”, it means that the
LLR was enabled and “Off” for disabled.
Note: When using two converters at the same time, then only one converter need to
enable the LLR function.
SPECIFICATIONS
Standards:
IEEE802.3ab 1000BASE-TX
IEEE802.3z 1000BASE-SX/LX
Data Transfer
Rate:
1488000pps for 1000Mbps
Duplex Mode:
Full Duplex Mode
LED indicators:
PWR, LNK/ACT
Media Interface:
RJ-45, SC
EMI
Compatiblity:
FCC Class B
CE Certification, Class B
VCCI Class B
Temperture:
Storage: -10°C ~ 70°C
Operating: 0°C ~ 40°C
Humidity:
10% ~90% non-condensing
Power
Consumption:
5.5 Watts (maximum)