Filter
Top Products
E - 11
SETUP
(continued to next page)(continued to next page)
(continued to next page)(continued to next page)
(continued to next page)
Analogue connection
Using the Audio cable (not supplied),
connect the left/right AUDIO OUT jack
on your Unit to the AUDIO IN jack.
Digital connection
Using the Coaxial Digital Audio cable
(not supplied), connect the DIGITAL
AUDIO OUT on your Unit to the
DIGITAL AUDIO IN jack on your another
equipment.
Listening to another audio
equipment
1. Turn on the Unit.
2.Turn on your audio equipment and
follow the instructions included with it
to select the AUDIO IN or DIGITAL IN
function.
B. Connecting another source
or
Component video outputs (DVD)
Some TVs or monitors are equipped with component video inputs.
Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks
on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit
to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on your TV
and the Red plug PR/CR VIDEO OUT jack on your Unit to PR/CR VIDEO IN jack on your TV to view the higher quality
picture playback.
Progressive outputs (DVD)
Some TVs or monitors are equipped
with component video inputs that are
capable of reproducing a progressively
scanned video signal.
Using the Audio cable (not supplied),
connect the left/right AUDIO OUT jacks on
your Unit to the left/right AUDIO IN jacks on
your TV and the Component video cable
(not supplied), connect the Green plug Y
VIDEO OUT jack on your Unit to Y VIDEO
IN jack on your TV, the Blue plug PB/CB
VIDEO OUT jack on your Unit to PB/CB
VIDEO IN jack on your TV and the Red plug
PR/CR VIDEO OUT jack on your Unit to PR/
CR VIDEO IN jack on your TV to enjoy
highest quality picture with less flicker.
Press the SETUP button and select Video
Output to YUV (see page 28). Connect the component video cable to TV, press the P. SCAN button repeatedly on
the remote control when DVD is stopped. "P. SCAN" display. You can select the output signal for better picture quality.
Attention:
• When progressive output is ctivated, no video signal output from S-video and RCA (CVBS) video jacks.
• Make sure your TV supports progressive scan component video signal, press the P. SCAN button repeatedly
until "CVBS" display for going back CVBS video signal.
Notes :
• Connect the Unit to your TV directly. If you connect the Unit through a VCR, the playback picture will be distorted
because DVD discs are copy protected.
• When you connect the Unit to other equipment, be sure to turn off the power and unplug all of the equipment from
the wall outlet before making any connection.
• Refer to the instruction manual of the connected equipment as well.
AM
(MW)
LOOP
ANT.
Y
L
R
L
R
DIGITAL
AUDIO OUT
SUBWOOFER
AUDIO OUT
5.1 CH
S-VIDEO OUT
(DVD)
VIDEO
IN
(VCR)
VIDEO
TV
AUDIO OUTVIDEO OUT
B
R
P
P
VIDEO OUT
AUDIO IN
To wall outlet
AM
(MW)
LOOP
ANT.
Y
L
R
L
R
DIGITAL
AUDIO OUT
SUBWOOFER
AUDI O OUT
5.1 CH
S-VIDEO OUT
(DVD)
VIDEO
IN
(VCR)
VIDEO
TV
AUDIO OUTVIDEO OUT
B
R
P
P
VIDEO OUT
AUDIO IN
To wall outlet
Audio cable
(not supplied)
(red)
(white)
(red)
(white)
Coaxial digital audio cable
(not supplied)
Audio equipment with digital
audio input jack
Amplifier of
stereo system, etc.
(not included)