Dolby Laboratories DVD Video DVD Player User Manual


 
If the fault persists, you can run the Diagnostic Program in the
player.
INSTRUCTIONS:
1 Switch the player off.
2 Hold both OPEN/CLOSE and ; pressed and switch on the
player.
BUSY’ appears on the display together with a counter.
The counter indicates the termination of the test when it
reaches zero.
After a few minutes, ‘
BUSY’ changes to ‘ERROR’ or ‘PASS’.
3 Swith off the player to exit the Diagnostic Program.
4
ERROR’ indicates that your player needs repair. Contact your
dealer or the Philips Customer Care Center (PCCC).
5 PASS’ indicates that the Diagnostic Program has found no
fault. In this case, the malfunction may be due to
misinterpretation of the operating intructions, or an
unsuitable disc, or incorrect connections. If you still cannot
solve the problem, contact your dealer or the Philips PCCC.
6 You will find the phone number of the Philips PCCC in your
Warranty Booklet.
DIAGNOSTIC PROGRAM
english
24
BEFORE REQUESTING SERVICE