Filter
Top Products
6 Draper, Inc.
765.987.7999
www.draperinc.com
Cinefold
T-Legs
Portable Screen with Wheels.
Cinefold is a portable screen that packs into an innovative
case with wheels. Trainers, presenters, producers, everyone who
takes a show on the road will appreciate the Cinefold’s many
advantages. Every Cinefold sets up quickly without tools,
and collapses into a compact case with wheels for easy travel or
storage.
The Cinefold frame and legs are built of 1 square structural
aluminum tubing and are conveniently color-coded and labeled
for quick assembly. Steel hardware is cadmium plated. When
assembled, the bottom of the frame is normally 44 above the
fl oor and adjusts in 6 increments. Hinges are tempered steel and
lock positively. Frame, legs, viewing surfaces and accessories are all
standardized for easy replacements or additions to the system. See
page 7 for Cinefold dimensions.
Viewing Surfaces
Your choice of viewing surfaces bordered in black: fl exible matt
white front projection or Cinefl ex rear projection. Surfaces are
easily interchangeable. Sizes and formats to meet virtually any
specifi cation: custom and truss-style sizes available (see page 8).
Standard Features
Carrying Case—Every Draper Cinefold comes complete with
the toughest carrying case you can buy. Designed for maximum
service and dependability, it is constructed using rotationally
molded polyethylene. Fully integrated handles are formed into
each end of the case and a rubber grip handle is recessed into
the lid. Each case has two, 1 w x 3 h diameter impact resistant
polyolefi n wheels molded in the wheel wells. Load capacity is 200
lbs. per wheel. Cases are designed to stack with the lids in place or
nest compactly with the lids off.
T-Legs—Constructed of sturdy 1 square hard-alloy structural
aluminum tubing, clear etched and anodized for long life. Hinged
inverted "T" shape, with rubber-tipped feet.
Keystone Elimination—T-legs may be adjusted to allow the
Cinefold to tilt forward up to 8°. Eases viewing and helps to
compensate for image distortion.
Hinges & Cranks—Hinges are manufactured of tempered
steel, and lock positively into place. Cranks are
5
/
16
diameter
crankbolts, for quick assembly without tools.
Optional Features
Heavy-Duty Legs—Extra reinforcement against front-to-back
movement. Strongly recommended for any screen over 7½ x 10,
or for any screen used with a Dress Kit.
Anti-Sway Stabilizers—Reinforce against side-to-side movement.
May be mounted either inside or outside Cinefold leg.
Recommended for screens over 10½ x 14 and for use with
Dress Kits.
Joining Clamp—Join two or more screens for a really wide
presentation. Clamps join screen frames from back, then L-
shaped section wraps to front and accepts snaps on masking
strips. Masking strips conceal hardware and provide image
continuity. White masking for use with matt white; black for
Cinefl ex.
Anti-Sway
Stabilizers
Heavy-Duty
Legs
Joining
Clamp
Hinges &
Cranks
Keystone
Elimination