Filter
Top Products
English
19
Maintenance
w Changing the Lamp
The projection display will detect the lamp life itself. It will show you a warning
message when the lamp is used over working hours. When you see this message,
change the lamp as soon as possible.
Make sure the projection display has cooled for at least 30 minutes before
change the lamp.
Warning: Lamp compartment is hot! Allow it to cool before changing
lamps!
* We suggest you a Professional Engineer to change the projection lamp
module.
Lamp Changing Directions:
1. Use a cross screwdriver to remove the screw of the lamp latch.
Open the lamp door.
2. Remove the screws on the metal protection cover and then open this metal cover.
Lamp Latch Screw
Metal Cover
Screws
Lamp Door
Lamp Metal Cover