Filter
Top Products
062210 2
At each IRE setting, in addition to Red, Green and Blue, the on-screen menu includes
White-x, White-y, White-Y adjustments.
Main Menu > Output Setup > Gray Scale > White-x
Main Menu > Output Setup > Gray Scale > White-y
Main Menu > Output Setup > Gray Scale > White-Y
2. Output HDCP Mode can be turned Off
Some applications do not required HDCP content protection. For these applications, the
ability to turn off HDCP on the outputimproves the iScan Duo’s response time when
providing a signal to a display.
IMPROVEMENTS
Updated the automation interface to support new features in this release as well as
Firmware update (0xAD) and system restart command (0xAE).
All solid color test patterns are now at 75 IRE.
Avoid front panel LED flashing when both A/V HDMI outputs aren't connected.
Added support to changing output settings without a display.
BUG FIXES
Test Pattern on-screen indicator did not show correct test patterns when using
remote short-cut buttons.
Serial automation command for Zoom (0x46) only accepted integer values.
Front panel menu text and back light remained on when exiting main menu.
At 1080p output, lower part of gamut selection menu remained at bottom of screen
when opening edit control.
Changing the output resolution from SXGA to VGA and cancelling the operation
would cause the system to be unresponsive.
CEC pass-through did not work.
Info screen page rolled over on front panel display but not on the OSD.
KNOWN BUGS
If 100 IRE Gray Scale adjustment is selected, moving to Color Gamut adjustments
and back to 100 IRE Gray Scale will cause the iScan Duo to output wrong gray scale
level. Selecting 90 IRE and back to 100 IRE levels fixes the problem.