Dynex DX-19LD150A11 Flat Panel Television User Manual


 
16
Adjusting the soundDX-19LD150A11/DX-22LD150A11
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
2 Press or to highlight Audio. The Audio menu opens.
3 Press or to highlight an option, then press or to adjust
the option. You can select:
Mode—Selects the EQ sound mode. You can select
Standard, Music, Theater, News, or Custom.
Treble—Adjusts the high sounds.
Bass—Adjusts the low sounds.
Balance—Adjusts the balance between the left and right
audio channels.
•Auto Volume—Turns auto volume on or off.
Advanced Audio—Opens the Advanced Audio submenu.
Press or to select an option, then press or to set
the option: you can select:
Digital Audio / SPDIF—Select the preferred audio
format for digital audio signals. Options include PCM
and RAW.
Audio Language—Select the default language track
when watching digital TV programs. Options include
English, Français, and Español.
MTS / SAP—Select the default language stream when
watching analog or digital TV channels. See “Selecting
the audio language” on page 15.
Note: You can also choose the audio mode with the remote control. Press
AUDIO repeatedly to cycle through the preset EQ modes. A popup
screen indicates the current EQ mode.
When you adjust the treble, bass, and balance settings in the Audio menu,
the audio mode is automatically set to Custom.
4 Press MENU to close the on-screen menu.
Playing TV audio only
You can turn off the picture on your TV/DVD combo and only listen to
the program audio.
To play TV audio only:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
2 Press or to highlight Channel. The Channel menu opens.
3 Press or to highlight Audio Only, then press or to
select On.
4 Press MENU to close the on-screen menu.
Notes:
•After Audio Only is set to On, the TV picture will disappear 10
seconds after the on-screen menu is closed.
Audio Only works only when the input source is TV and your TV/DVD
combo is receiving a broadcast signal.
•To exit Audio Only mode, press any button except the power button.
When you exit Audio Only mode, the Audio Only option is
automatically reset to Off.
DX-19LD-22LD_10-0118.book Page 16 Monday, February 1, 2010 1:44 PM