Filter
Top Products
Changing channel settings
17
DX-19LD150A11/DX-22LD150A11
Changing channel settings
Automatically searching for TV channels
Before you can watch TV channels in your area, you need to let the
TV/DVD combo scan for available TV channels and store them in the TV
channel list. You do not need to scan for channels unless the available
channels changed after you ran the Setup Wizard. For more
information, see “Turning on your TV/DVD combo for the first time” on
page 11.
To scan for channels:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
2 Press or to highlight Channel. The Channel menu opens.
3 Press or to highlight Air / Cable, then press or to
change the setting to:
• Air—VHF and UHF channels
• Cable—Cable TV channels (no cable box).
• Cable / Satellite Box—Cable or satellite TV tuner box.
Channel auto search is not necessary if you select this option.
4 Press or to highlight Auto Channel Search, then press
ENTER. A confirmation box opens.
5 Press or to select Yes, then press ENTER to automatically
start the scan. A progress box shows the progress of the scan.
Auto Scan may take a while to complete. A progress report is
displayed while your TV/DVD combo is scanning for available
channels. After the digital channel scan is complete, you can
continue to search for analog channels without pressing any
buttons, or you can press EXIT to exit if you do not need the
analog channel scan. You can press MENU or EXIT at any time to
stop Auto Scan prior to completion, but you will need to run it
later to complete the process.
Auto Scan creates a list of available/receivable channels for the
selected signal input.
Hiding channels
You can delete channels from the channel list so that your TV/DVD
combo skips the channels when you press CH /CH . You can still tune
to the hidden channel by using the number buttons.
To hide a channel:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
2 Press or to highlight Channel. The Channel menu opens.
DX-19LD-22LD_10-0118.book Page 17 Monday, February 1, 2010 1:44 PM