Filter
Top Products
14
Turning on your TV for the first timeDX-26LD150A11/DX-32LD150A11
Connecting a home theater system
To connect an audio receiver or Digital sound system:
1 Make sure that your TV/DVD combo’s power cord is unplugged
and the audio device is turned off.
2 Connect analog audio cables to the AUDIO L/R OUTPUT jacks on
the back of your TV/DVD combo, then plug the cables into the
Audio In jacks of your audio receiver.
-OR-
Plug a digital coaxial cable into the COAXIAL DIGITAL OUTPUT
jack on the back of your TV/DVD combo, then plug it into the
digital coaxial input jack on your Digital sound system or home
theater system.
Note: The DIGITAL OUTPUT jack only works with digital sources.
Connecting headphones
To connect headphones:
• Connect the headphones to the headphone jack on the side of
your TV/DVD combo.
Note: Loud noise can damage your hearing. When using headphones, use
the lowest volume setting that still lets you hear the sound.
Turning on your TV for the first
time
The first time you turn on your TV, the Setup Wizard opens. The Setup
Wizard guides you through setting up basic settings including the menu
language, time mode, picture mode, and TV signal source.
To configure your TV:
1 Make sure that you have inserted the batteries in the remote
control, connected your devices to the TV, and connected the AC
power.
2 Press (Power), then wait several seconds. The initial Setup
Wizard opens (only the first time you turn on your TV) to the
Choose your menu language screen.
3 Press or to select English, Français, or Español, then
press OK/ENTER to confirm. The Time screen opens with Mode
highlighted.
4 Press or to highlight an option, then press
or to
adjust the option. You can select:
• Mode—You can select Auto or Custom time mode. If you
select Auto, the date and time are set based on a time signal
received from a DTV channel. If you select Custom, you can
adjust the date and time.
• DST (Daylight Saving Time)—You can select On or Off.
• Time Zone—You can select Pacific, Alaska, Hawaii,
Atlantic, Eastern, Central, or Mountain.
• Year—Press
or to select the current year.
• Month—Press or to select the current month.
• Day—Press or to select the current day.
• Time—When Time is highlighted, press or . Press
or
to move the cursor from field to field, then press or
to change the value in the field. Press TV MENU when the
time settings (hour and minute) are complete.
Back of TV/DVD
combo
Digital coaxial audio cable
Digital sound system
Audio cable
Audio
receiver
Back of TV/DVD
combo
Side of TV/DVD
combo
Previous
MENU
Next
ENTER
Setup Wizard
Move Select
Choose your menu language
Español
Next
Français
English
Setup Wizard
Time
DST
Off
Pacific
1980
1
6
Year
Month
Day
Time
Time Zone
Auto
Mode
0AM12 :
Previous
MENU
Next
ENTER
Move Select
DX-26LD-36LD_09-1090.book Page 14 Wednesday, January 27, 2010 8:33 AM