Dynex DX-PD510 TV DVD Combo User Manual


 
27
O. Specifications
Compatible DISC: DVD/CD/MP3
Signal system: DVD--NTSC/PAL + Monitor--NTSC
Panel size: 5 inch
Frequency response: 20 Hz to 20 kHz
Video output: 1 Vp-p/75 Ohm, unbalanced
Audio output: 1.4Vrms/10kOhm
Audio S/N: Better than 60 dB
Dynamic range : Better than 85 dB
Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm
Power source: DC 9V
Power consumption: 12 W
Operating temperature: 5~35°C
Weight : 0.67 kg
Dimensions (W x D x H): 8.07 X 5.98 X1.57inches
205 x 152 x 40mm
Battery Type: NiMh
P. Rechargeable Battery Installation and Use
The player utilizes a set of long-life NiMh batteries for a portable power
supply. NiMh batteries feature high storage capacity and low level of
degradation. This means the NiMh batteries do not have Memory Ef-
fect and thus can be recharged safely regardless of whether the bat-
tery is fully or only partially discharged. Please fully charge the battery
prior to first use.
NOTE: When the DVD player is used with the battery as a power
source, ensure that the battery has been charged for at least eight
hours prior to connecting it to the DVD player.
If you plan not to use the battery for an extended period of time (one
week or longer), we recommend that you first fully charge the battery
and store it away properly. For longer periods of storage, please re-
charge the battery at least once every two months to maintain the
battery in optimum condition. Under no circumstances short the bat-
tery terminals, store the battery in a metal container, or leave the bat-
tery in a humid or damp environment. Ideally, store the battery in an
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com