Filter
Top Products
Coaxial connection
1 Slide the selector switch on the side of the converter to COAXIAL.
2 Connect a coaxial digital cable to the COAXIAL IN port on the audio
converter, then connect it to the DIGITAL OUT port on your audio or
video device.
3 Connect a RCA stereo audio cable to the AUDIO OUT (R and L) jacks on
the audio converter, then connect it to the AUDIO IN (R and L) jacks on
your audio device.
4 Connect the cable from the power adapter to the DC jack of your audio
converter, then plug the power adapter into an AC wall outlet.
5 Turn on the power to the connected devices and begin playback. If you
are unable to hear the audio output from your stereo system, check the
connections and settings to make sure that they are all correct.
Note: You must change the audio device’s audio output to “PCM” format.
Refer to the manual you received with the output device for additional
information.
ENGLISH 12-0728
Specications
Digital Audio Format Support LPCM 44KHz, 48KHz, 96KHz
Power 5 VDC, 600 mA
Important safety information
• Indoor use only.
• There are no user serviceable parts. Do not open the housing.
• Do not use in a high humidity environment.
• Use the attached AC/DC adapter only.
One-year limited warranty
Visit www.dynexproducts.com for details.
Contact Dynex:
For customer service, please call 1-800-305-2204
www.dynexproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
© 2012 BBY Solutions, Inc., All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.