Eiki LC-XM1 CRT Television User Manual


 
7
PREPARATION
NAME OF EACH PART OF THE PROJECTOR
BACK OF THE CABINET
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
When using or installing the projector, the
following precautions should be taken.
Do not put a flammable object near this
vent.
Keep the side grills at least 3 (1m) away
from any object, especially heat-sensitive
object.
Do not touch this area, especially screws
and metallic parts. This area will become
hot while the projector is used.
This projector detects the internal
temperature and automatically controls the
operating power of the Cooling Fans.
POWER CORD CONNECTOR
EXHAUST VENT
FRONT OF THE CABINET
PROJECTION LENS
SPEAKER
(Monaural)
INFRARED
REMOTE RECEIVER
LENS COVER
TERMINALS
AND CONNECTORS
ZOOM RING
FOCUS RING
These Air Intake Vents
should not be blocked.
BOTTOM OF THE CABINET
LAMP COVER
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
AIR INTAKE VENTS
AND AIR FILTERS
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover the vent slot.
Keep sides and rear clear of any
obstructions. Obstructions may block
cooling air.
AIR INTAKE VENTS
(Both sides and rear)