Filter
Top Products
Maintenance and Troubleshootin g
Indicators
The Power and Lamp indicators show the status of the projector. Before
requesting repair, check the projector status using the chart below. I
f
the problem cannot be resolved contact your dealer.
an internal fan, the lamp will shut off
54
Power
(Green)
Lamp
(Red)
Conditions Notes
Slow
flashing
Off
Stand by
mode
Projector is ready to be turned on (normal)
On Off On mode Projector is on and operating normally
On
Slow
flashing
Cool-down
mode
Projector is in cool-down mode and will not
respond to user input (normal)
On
Fast
flashing
Fan-fault
mode
The projector has detected a problem with
automatically, contact your dealer
Fast
flashing
On
Lamp-cover
open
T h e l a m p c o v e r i s o p e n o r t h e r e i s
a problem with the lamp. If the lamp
door is closed and replacing the lamp
does not correct the issue, contact your
dealer.
Fast
flashing
Fast
flashing
High
temperature
The projector has overheated and shut the
lamp off. Correct the over temp condition
immediately.
1. Check that the ventilation slots are free
from obstructions
2. Check the cleanliness of the air filter.
3. If the condition persists, contact your
dealer
Slow
flashing
Slow
flashing
Lamp-fault
mode
The lamp does not light., come back ”stand
by mode”, and turn on the power button.