Filter
Top Products
? Input Block
AV [ENTER
Change Password
Clean All -
Note
MENU
Tuner Mode Antenna Cable
Channel Scan
Channel Skip - CH+ CH-
MTS
Audio Language
WARNING:
Caution
- You can block the input source with this function. For example, if you want to block AV
input, just highlight [ ] and press ].The AV input will not be seen in the screen.
- The first time you use this function, use the default password. If you want to
change it, first enter the new password then enter the same password again.
This function will let you clean all the channels stored on this TV.
: If you choose this function, all the programs you preset will be lost.
1. Press to open the OSD option
2. Press or to highlight TV, then press to enter the TV menu.
3. Press or to highlight an option, then press or to adjust the option. You can
adjust:
- Select the TV signal source. You can select or .
- Scans for channels that have signals and stores the channels information in memory.
When you press or , your TV skips any channels that do not have a signal.
Deletes a channel stored in memory. When you press or , your TV skips the
channel you deleted. You can still tune to the channel using the number buttons on the remote control.
- Selects the sound mode. You can select Mono, Stereo, or SAP (second audio program).
-Selects the audio language for a program.
Do not try to remove the cabinet from the back. Refer servicing to qualified service technicians.
1. Unplug the TV to avoid possible shock hazard.
2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause
damage to the TV.
3. Wipe off any excess moisture with a clean dry cloth.
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
?
?
?
?
?
?
?
TV Settings
Cleaning and Care
pq u
pq tu
tu
Appendix
To clean the TV screen:
ENTER
Enter
Select
EXIT
Exit
TV
TV
TunerMode Antenna
ChannelScan
ChannelSkip
MTS Stereo
AudioLanguage English
: Select ENTER:Enter EXIT:Exit
Basic Operation
19