Filter
Top Products
BASIC SETUP AND CONNECTIONS
1.) Carefully remove the system from the display carton and confirm that you have the following items:
• Main Unit x 1. • Remote Batteries x 2.
• Satellite Speakers with cables x 5. • Video Cable x 1.
• Subwoofer with cable x 1. • AM and FM Antennas.
• Remote Control x 1. • Owner’s Manual.
Save the carton and all packing materials.
2.) Install the batteries in the remote control.
3.) Place the main unit in the desired location but do not connect the AC power cord at this time.
4.) Refer to the following connection diagram.
• Connect all 6 speakers to the color coded terminals on the back of the main unit. The cables and terminals are color
coded for your convenience.
• Connect your TV to the back of the main unit using the supplied video cable (yellow plugs on each end).
• Connect the AM and FM antennas to the back of the main unit.
• Connect the power cord of the main unit to a 120V 60Hz AC household outlet. The red STANDBY indicator turns ‘On’
to confirm the unit has been in Standby state.
Note:
To suit your convenience, we suggest the unit be kept in Standby mode. If the system will not be used for an extended period
such as a two week vacation, etc - then you’d better unplug the power cord from the AC household outlet.
(4 )
(8 )
1
DVD VIDEO PLAYER
POWER SOURCE AC 120V~60Hz 100WATTS
MODEL.: AV510
EMERSON RADIO CORP.,
9 ENTIN ROAD
PARSIPPANY, NJ07054
MADE IN CHINA
VIDEO IN
TV SET
Subwoofer
Left Front
Right Front
Center
Right Surround Left Surround
AM antenna
FM antenna