Emerson EWC1301 TV VCR Combo User Manual


 
- 8 - EN
9I03
- REAR VIEW - [Fig.3]
26
ANT.
27
7 F.FWD button Press to rapidly advance the tape,
or to view the picture rapidly in forward during
playback mode. (Forward Search)
B
button
When setting program (for example: setting clock
or timer program), press to determine your selec-
tion and proceed to the next step you want to
input.
Press to determine setting modes from on screen
menu.
Press to select a mode from a particular menu.
(for example: LANGUAGE or USER’S SET UP)
8
REC buttonPress for manual recording.
OTR buttonActivates One Touch Recording.
(only on the TV/VCR)
9
RECORD indicatorFlashes during recording.
Lights up in the Stand-by mode for Timer
Recording.
10
Remote Sensor WindowReceives the infrared
signals from the remote control.
11
CHANNEL K / L buttonsPress to select the
desired channels for viewing or recording.
You may display the main menu on the TV screen
by pressing repeatedly this button on the
TV/VCR.
TRACKING function Press to minimize video
‘noise’ (lines or dots on screen) during playback
mode. (See page 19.)
12
VOLUME
XX
/
YY
buttonsAdjust the volume
level.
13
POWER button Press to turn TV/VCR on and
off. Press to activate timer recording.
14
Cassette compartment
15 Number buttonsPress to select desired channels
for viewing or recording. To select channels from
1 to 9, first press the 0 button and then 1 to 9.
+100 buttonWhen selecting cable channels
which are higher than 99, press this button first,
then press the last two digits. (To select channel
125, first press the “+100” button then press “2”
and “5”.)
16
MENU buttonPress to display the main menu on
the TV screen.
17
DISPLAY buttonDisplay the counter or the cur-
rent channel number and current time on the TV
screen. (See page 25.)
18
SPEED buttonPress to choose the desired
recording speed:SP/SLP.
19
T-PROG. CLEAR buttonPress to cancel a setting
of timer program. (See page 23.)
COUNTER RESET buttonPress to reset counter
to 0:00:00.
20
GAME buttonSets the game mode and external
input mode at the same time. (See page 14.)
21
TIME SEARCH buttonPress to activate Time
Search mode.
22
PAUSE/STILL buttonPress to temporarily stop
the tape during the recording or to view a still pic-
ture during playback.
23
MUTE buttonMutes the sound. Press it again to
resume sound.
24
CHANNEL RETURN buttonPress to go back to
the previously viewed channel. For example,
pressing this button once will change channel dis-
play from 3 (present channel) to 10 (previously
viewed channel), and pressing it a second time
will return from 10 to 3.
25
WAKE-UP/SLEEP buttonSets the Wake up or
Sleep Timer. (See page 23 and 24.)
26
Power cord Connect to a standard AC outlet
(120V/60Hz).
27
ANT. terminal Connect to an antenna or cable
system.
T5209/7209 01.2.14 6:35 PM Page 8