Open as PDF
Quick Start Guide
Thank you for purchasing this Sony product.
After following this step by step guide you
will be able to:
Insert Batteries into the Remote Control.
Connect the Aerial to your TV.
Select the language of the menu screens.
Tune your TV.
Change the Programme order of the TV
View TV Programmes.
Connecting an Indoor
Aerial (only for KV-14LT1U)
Connecting an Outdoor
Aerial and VCR
Inserting Batteries into
the Remote Control
Ecological Paper - Totally Chlorine Free
The Scart lead is optional.
If you use this optional connection
it can improve the picture and sound quality when
using a VCR.
If you do not use a SCART lead, after automatically
tuning the TV refer to the «Manual Programme
Preset» option on page 11 step a) of the instruction
manual, to tune in the TV to the output of your VCR.
Also refer to your VCR instruction manual to find out
how to find the output channel of your VCR.
Connecting cables are not supplied.
For a better reception we recommend you to connect an external
aerial. However, where an external aerial is not available and your
local UHF signal is strong you can connect the supplied loop aerial
1 Insert the loop aerial into the opening on top of the set until
2 Connect the aerial connector to the aerial socket on the rear
of the set.
3 After turning on the TV, adjust the aerial for optimum