Filter
Top Products
–
12
–
EN
9F21
CONNECTING TO A DOLBY DIGITAL DECODER
OR DTS DECODER
If using this DVD player to play back a DVD in a 5.1 channel Dolby Digital surround or DTS surround format,
the DVD player outputs a Dolby Digital or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack.
By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic
ambience with powerful and high-quality surround sound of a professional standard such as can be heard in
movie theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
A/V-compatible
or
wide screen TV
Front speaker
(left)
Center
speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
or
To VIDEO
INPUT jack
To S-VIDEO INPUT jack To S-VIDEO OUT jack
To VIDEO
OUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
To COAXIAL DIGITAL
AUDIO INPUT jack
Dolby Digital
or DTS decoder
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.
¡If connected to a Dolby Digital decoder, set Dolby Digital to on for audio output in the setup mode.
¡If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.
¡Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital and DTS to off for audio
output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also
damage the speakers.
[Fig. 5]
Manufactured under license from Dolby
Laboratories.“Dolby”and the double-D sym-
bol are trademarks of Dolby Laboratories.
Confidential Unpublished Works.
©1992-
1997 Dolby Laboratories, Inc. All rights
reserved.
DTS is a trademark of Digital Theater
Systems Inc. in the United States of
America.
E5500UD 01.1.12 8:54 PM Page 12