Filter
Top Products
–
16
–
EN
1L25
STARTING FROM A DESIRED
TIME COUNT
1 Press the SEARCH MODE button twice.
2 Press the numeric buttons to set the desired
time count.
¡
Example: 1 hour, 23 minutes and
30 seconds
1 → 2 → 3 → 3 → 0
CDDVD
TIME 1:23:30
TOTAL 1:29:00
Notes
¡In the case of DVD, Time Search in Title is effective.
(But Time Search in Chapter is ineffective.)
¡In the case of CD, Time Search in Track is effective.
(But Time Search in the entire disc is ineffective.)
¡Playback from a desired time count is not available
with some discs or if the unit is in stop mode.
¡If wrong numbers are entered, press the CLEAR but-
ton and re-enter the correct numbers.
MARKER
You can define the part to be called back.
1 Press the SEARCH MODE button three
times during playback.
Set the marker
¡Using the cursor (s/B) button, position the cursor
on to the marker number shown as “NOT SET”.
Press the ENTER button when the screen to be
reviewed appears. The marked
time will be displayed. Up to 5
points can be marked.
Call back the marker
¡Using the cursor (s/B) button, position the cursor
on to the marker number to be called back and press
the ENTER button.
Clear the marker
¡Using the cursor (s/B) button, position the cursor
on to the marker number to be cleared and press the
CLEAR button.
To clear all markers, place the cursor on “AC” (All
clear markers) and press the ENTER button.
2 Press the SEARCH MODE button or the
RETURN button to exit the display.
CDDVD
1 2 3 4 5 AC
NOT SET
RANDOM (Audio CD)
1 Press the MODE button in stop mode.
¡The program setting menu screen will appear.
2 Press the MODE button again.
CD
RANDOM
EXIT : MODESTART : PLAY
3 Press the PLAY button. Random playback
will then start.
Note
¡Program playback is not available during random
playback.
E5662UD.qxp 02.2.7 2:18 PM Page 16