Emerson EWD7003 DVD Player User Manual


 
12
EN
PLAYING A DISC
Track Selection
Press SEARCH MODE during playback.
The FILE LIST will appear.
Select a desired track using Arrow (L/K/B/s).
Press
B
when you want to go to the next hierarchy.
Press
s
when you want to go back to the previous
hierarchy.
Press PLAY to start playing
NOTES:
Press SEARCH MODE to EXIT.
Some selections may require additional time to be recog-
nized.
3
2
1
MP3
Press MODE twice while playback is stopped.
Press
PLAY to play the tracks in random order.
2
1
MP3
Random Playback
This feature allows you to program a mp3 disc to play in a
desired sequence.
Press MODE while playback is stopped.
The PROGRAM screen will appear.
Press K or L to select a track, then press ENTER,
to save it in a program.
Press CLEAR to erase the incorrect input.
Press PLAY to start programmed playback.
3
2
1
MP3
Program
The DVD player allows you to select a language during DVD
disc (if multi language available) playback.
Press AUDIO during playback.
Press
AUDIO repeatedly to select your desired
language.
2
1
DVD-V
Audio Language
Some DVD discs contain scenes which have been shot simulta-
neously from various angles.You can change the camera angle
when the ( ) icon appears on the screen.
Press ANGLE during playback.
The selected angle will be displayed on the display bar
at the top of the screen.
Press ANGLE repeatedly to select your desired angle
.
2
1
DVD-V
Camera Angle
The DVD player allows you to select a language for subtitle
during DVD disc (if available) playback.
Press SUBTITLE during playback.
Press
SUBTITLE repeatedly to select your desired
subtitle language.
The selected language will be displayed on the display
bar at the top of the screen.
To turn off subtitles, press SUBTITLE repeatedly
until OFF appears.
NOTES:
Pressing AUDIO may not work on some DVDs with multiple
audio languages (e.g. DVDs which allow audio language set-
ting on the disc menu).
Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
If the desired language is not shown after pressing SUBTITLE
several times, the disc does not have subtitles in that language.
If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guages, ---will be displayed instead. (Refer to page 14.)
3
2
1
DVD-V
Subtitle Language
Press AUDIO repeatedly during playback to select
between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
NOTE:
If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.
1
CD
Stereo Sound Mode
You can check information about the current disc by pressing
DISPLAY on the remote control.
Press DISPLAY during play-
back to show current Chapter
.
The elapsed and remaining
playing time of the current chapter will be displayed.
Press DISPLAY again to show current Title.
The elapsed and remaining playing time of the current
title will be displayed.
Press DISPLAY the third time.
The BIT RATE and the current repeat setting will be
displayed.
If you are playing a dual layered disc, the layer number
will also be displayed ( L0: Layer 0 is playing. L1: Layer
1 is playing).
Press DISPLAY the fourth time to remove the display.
Press DISPLAY during playback, the current Track
will be displayed on the TV screen.
The elapsed and remaining playing time of the current
track will be displayed.
Press DISPLAY again to show current Total Track.
The elapsed and remaining playing time of the current
total track will be displayed.
Press DISPLAY the third time to remove the display.
3
2
1
CD
4
3
2
1
DVD-V
Changing the On-Screen Display
9/49 0:00:00 -0:00:00
E57T0UD.QX3 03.1.17 4:50 PM Page 12