Filter
Top Products
This function allows you to shut off the power automatically in a certain amount of time.
1) Hit
[POWER] to turn on the TV and hit [SLEEP].
2) Within 10 seconds, hit [SLEEP] repeatedly to change an amount of
time. Each time [SLEEP] is hit, the time increases by 10 minutes up to
90 minutes.
INSTALLING THE BATTERIES
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote con-
trol.
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
PREPARATION FOR USE
[ANTENNA CONNECTION] [CATV/SATELLITE CONNECTION]
2
1
3
CONNECTIONS
Video 1 INPUT (Rear)
ANT.IN
S-VIDEO
AUDIO IN
R
L
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks, select “VIDEO1” or “VIDEO2” mode by hitting
[INPUT SELECT] on the remote control. The input mode changes by pressing the button as fol-
lowing:
•To use the jacks on the rear of the TV, select “VIDEO1”.
•To use the jacks on the front of the TV, select “VIDEO2”.
TV channel VIDEO1 (Rear) VIDEO2 (Front)
OPERATIONS
Video 2 INPUT (Front)
VIDEO
AUDIO RL
SLEEP TIMER SETTING
Note:
●
If some digits appear in the corner of the screen when the unit is turned on at the first time, hit
[POWER] without unplugging the power cord.
Audio Cable
S-Video Cable
Video Cassette Recorder
Note:
●
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
connecting monaural audio equipment.
Video Cable
Audio Cable
Video Game
Video Camera
Front of this TV
Rear of this TV
Note:
●
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
connecting monaural audio equipment.
REMOTE CONTROL AND FRONT PANEL FUNCTION
123
456
789
0 +100
DISPLAY
VOL
CH
CH
VOL
SLEEP
CHANNEL
RETURN
INPUT
SELECT
MUTE
GAME
POWER
MENU
POWER button
To turn TV on/off
Channel number buttons
CH(ANNEL)
KK
/
LL
buttons
MENU button
GAME button
SLEEP button
DISPLAY button
To display CH No./Audio Status
CHANNEL RETURN button
To return previous screen
INPUT SELECT button
To select TV or external input
MUTE button
VOL(UME)
KK
/
LL
buttons
To select channel
To adjust volume
VIDEO L
-
AUDIO
-
R
MENU
Y
VOLUME
XL
CHANNEL
K
HEADPHONE
POWER
VIDEO L
-
AUDIO
-
R
MENU
Y VOLUME XL CHANNEL K
HEADPHONE
POWER
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT AND FULLY INSERT.
MISE EN GARDE: POUR ÉVITER LES RISQUES D’ÉLECTROCUTION, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU’AU FOND.
[EXTERNAL CONNECTION]
ex.
ex.
Cables used here are available on the market.
*Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
UHF
VHF
VHF/UHF
OUT IN
ANT. IN
VHF/UHF
Combiner
OR
OR
75-ohm
Coaxial Cable
From Cable
System
From Cable
System
or Satellite
Antenna
CATV Box
*
or Satellite Box
UHF/VHF Rod Antenna
(Not supplied)
OR
Infrared Sensor Window
POWER button
CHANNEL ▲/▼ buttons
VOLUME
XX
/
YY
buttons
MENU button
HEADPHONE jack
AUDIO L/R input jacks
VIDEO input jack
Note:
●
For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN
jack before moving the unit.
(IN)
(OUT)
(OUT)
(IN)
(OUT)
(IN)
(IN)
(OUT)
Notes:
●
When you disconnect the unit from the AC outlet or when you have a power failure, the sleep
time will be lost.
●
To cancel the sleep timer, hit [SLEEP] repeatedly until “SLEEP 0” is displayed.
●
The Sleep Timer Setting display will disappear automatically after 10 seconds of the operation.
SLEEP 10