Emerson SB315 CRT Television User Manual


 
TV OPERATION
16
Adjust the volume level by pressing the VOLUME UP
()1/DOWN () 2 buttons.
1
2
1
1
3
For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 14.
Press and release the CHANNEL UP () 1/DOWN () 2
buttons. The TV automatically stops at the next channel set
into memory. This will not operate if channels are not set
into memory.
Direct Program Selection buttons (0-9)
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
For Channels 1 through 9, press 1-9
3 as desired.
For Channels 10 through 99, press the -- button
4 once,
then the two digits in order.
For Channels 100 through 125, press the -- button
4
twice, then the three digits in order.
1
2
3
4
3
4
4
Set the AIR/CATV Menu Option as described on page 12.
Select
Set-Up
Language : English
Skip: Off
Channel : 2
Reception
Memorize Channels
Air
Adjust Exit
2
Press the Power button to turn on the
TV.
2
3
4
1
OPTIONS
AIR: If using a VHF/UHF
antenna.
CATV: If using Cable TV.
NOTES:
When
AIR/CATV option is set to AIR, only channels up
to 69 can be selected. When set to CATV, channels
up to 125 can be selected.
If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
AIR/CATV option must be set to CA
TV when using cable, see page 12.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.