Filter
Top Products
Setting Up the Projector 17
The included projector mount lets you attach the projector to the wall or ceiling in the
location that works best for your room.
Follow the instructions included with the mount to install the projector, which weighs
11.5 pounds. The wall or ceiling where you install it must be capable of supporting a weight
of 58 pounds.
In addition to the tools supplied with the projector mount, you will need a Phillips head
screwdriver and a drill to use on the wall or ceiling.
If you install the projector on the ceiling, you will need to invert the picture so that it appears
right side up. Follow these steps:
1. Press the
Menu button on the remote control.
2. Press the menu navigation buttons to open the
Settings menu, then select Projection.
3. Use the navigation buttons to select
Front/Ceiling.
4. Press the
Menu button when done.
If you are planning to use an AV controller with the
projector, refer to the table of ESC/VP21 command codes
on page 67.
Menu
button
Menu
navigation
buttons