Filter
Top Products
29
Configuration Menu Functions
Configuration Menu
Resolution
Sync Info
Source
Lamp Hours
Input Signal
Resolution
Sync Info
The "Info" menu is only used to display the projector status.
Video Signal
Memory1 to Memory10
p.36
Save Memory
Yes, No
p.36
Reset All
Yes, No
p.36
Reset Memory
Display
p.35
Reset
Yes, No
Load Memory
Memory1 to Memory10
p.36
p.34
Direct Power On
On, Off
Menu Color
Color 1, Color 2
Messages
On, Off
Display Background
Black, Blue, Logo
Projection
p.34
Front, Front/Ceiling, Rear, Rear/Ceiling
Refresh Rate
Component
Auto, YCbCr , YPbPr
Top-left, Top-center, Top-right, Center-left, Center,
Center-right, Bottom-left, Bottom-center, Bottom-right
Menu Position
Yes, No
p.36
Reset Lamp Hours
p.34
Off, 5min., 10min., 30min.
Sleep Mode
p.34
Child Lock
On, Off
p.34
Control Panel Lock
On, Off
p.34
Trigger Out
On, Off
p.34
High Altitude Mode
On, Off
p.35
Illumination
On, Off
Scan Mode
Display the color depth of HDMI transmission.
Deep Color
Status
This is information about errors that have occurred on the projector.
This value is sometimes referred to when inquiries are made.
Input Signal
p.35
Video Signal
Auto, NTSC , NTSC4.43, PAL ,
M-PAL, N-PAL, PAL60, SECAM
Startup Screen
On, Off
Settings
p.35
Only displayed for composite video/S-Video input
Only displayed for component video/Computer image input
Only displayed for Computer image input
Memory
Reset
The message text will be displayed in yellow when it is time to replace the lamp.
Time from 0H to 10H will be displayed as 0H. From 10H onwards, the display will be in units of 1H.
p.36
Rename Memory
Memory1 to Memory10
Erase Memory
p.36
Memory1 to Memory10
Info
p.35
Language