EverFocus 410H DVR User Manual


 
In HDD TEMP., we define:
(1) BUZZER: HDD TEMPERATURE buzzer.
ENABLE: To enable a buzzer when HDDs temperature is over 70 ° C.
DISABLE: To disable buzzer.
(2) ALARM OUTPUT:
The setting of alarms which are NONE and 1, where 1 means the alarm is enabled.
(3) ALARM DURATION: PERMANENT
(4) NETWORK ALARM:
YES:To enable network alarm.
NO:To disable network alarm.
(5) SEND EMAIL:
YES: Send an email when HDDs temperature is overheated.
NO: Do not send an email when HDDs temperature is overheated.
The email address can be set in the NETWORK SETUP MENU.
(6) STOP RECORD:
YES: Stop recording when HDDs temperature is overheated.
NO: Wont stop recording even when HDDs temperature is overheated.
3.11.2 HDD TEMP.
53