EverFocus EDR1640 DVR User Manual


 
5.2 SEARCH PLAYBACK
(1) TIME / DATE Search Playback
Press the SEARCH key to enter the SEARCH MENU.
SEARCH
In the SEARCH MENU,
Dial the Jog clockwise or counterclockwise to change subentry values.
Press the ENTER key to go next subentry in search menu setting, and
press the DISPLAY key to go last subentry in search menu setting.
Press MENU to exit.
Press SELECT or tilt wheel of the mouse to start search.
Note: If there is no image stored in the date/time specified, then the image will keep at the end of the
last play, and the display time on the status bar shows “??:??”.
EVENT is not able to be changed in the “BY TIME / DATE” search method. DATE and TIME are
not able to be changed in the “EVENT” search mode. Size of total data file, HDD temperature, start
recording time and end recording time of the disk are shown in the search screen.
The following window will show up after pressing the SEARCH key. Select “BY TIME / DATE”,
and then select the time you want to search. Press SELECT, the system will start to search.
60