(5) LANGUAGE: System language can be set in different languages.
Note: The available language depends on the different areas and countries.
(6) QUICK PLAY: Set up the start play time of the normal play mode.
TIME: Quick play time, 5 to 59 minutes ago. The default value is 10 minutes.
ON: Enable quick play. The video played time is the immediate play time from now.
OFF: Disable quick play. Videos will start to be played from the end point of the last play.
Note: The recommendatory quick play time is 10 minutes. The video cannot be played due to
the video file is not stored to HDD yet if you set a quick play time too short.
(7) SYSTEM PASSWORD ENABLE :
YES: Select YES to enable the password function.
NO: Select NO to disable the password function.
(8) PASSWORD and RIGHTS :
The login passwords here are used to operate and set up this machine. The different login passwords
indicate the different level of users, and no login name is necessary.
The digit will show up instead of a “ ” sign when the cursor is moved on it. Dial the Jog to change
the digit on which the cursor is located of the password, and press ENTER/DISPLAY to go
next/last digit. The available digits are 1 to 9.
There are three system access levels and one none access level. The below chart on the next page
shows the rights of each level.
Note: If the passwords of different levels are set the same, you will enter a higher level when you
login. For example, you will login to the ADMINISTRATOR level if the password of
ADMINISTRATOR and GENERAL levels are the same.
53