EverFocus TP-S1 0 9DR DVR User Manual


 
MENU
6.13 MATRIX SETTING MENU
CH DWELL EVENT
00 07 SECS NONE
00 07 SECS NONE
00 07 SECS NONE
00 07 SECS NONE
00 07 SECS NONE
00 07 SECS NONE
00 07 SECS NONE
00 07 SECS NONE
00 07 SECS NONE
MONITOR-0 SETTING MENU
MONITOR-0
MONITOR-1
MONITOR-2
MONITOR-3
MONITOR-4
MATRIX SETTING MENU
CALL MONITOR
ENTER
(Dialog 1)
(Dialog 2)
In the MATRIX SETTING MENU, we define the standard sequences for each matrix monitor
and event, which override these sequences.
Users may set up to 5 call monitors accordingly (Dialog 1).
Note: CALL MONITOR is the regular CALL MONITOR. MONITOR-1~4 are additional 4 call
monitors for video matrix functions.
Select the desired call monitor and then press ENTER key. The SUB-MENU will show as Dialog 2.
CH, DWELL, EVENT:
(1) CH (Channel): Select the camera to be shown in the standard sequence of this call
monitor. With setting “00” the channel will be skipped in the sequence.
(2) DWELL (Dwelling time): Set 0~99 seconds for the dwelling time of each camera.
(3) EVENT: Set the alarm and correspondent motion to the camera.
NONE: no alarm or motion action is assigned to this camera.
MOTION: If MOTION detection is active for this camera, the camera will be
displayed, if motion is detected. After alarm record duration the monitor switches
back to standard sequence or spot camera (depending on operation).
A01 ~ A09: The camera will be displayed, if selected alarm input is active.
Turn the JOG dial clockwise or counter-clockwise to select the options.
Press MENU key to return to Main Menu, press again to leave Set up Menu.
MENU
Press ENTER key to confirm the option and move to next column.
ENTER
24