Extron electronic CTL120-3 Universal Remote User Manual


  Open as PDF
of 2
 
Resetting the component code
If, for any reason, the component device code is erased, reset the code with
the following instructions:
1. Press and release the S (set) button.
2. Press and release the SWP SWITCHER button.
3. Enter the component’s three digit code number using the numeric
buttons: 001.
4. Press and release the ENT (ENTER) button to store the code.
Other CTL120-3 functions
The following button functions are also included for the SWP123.*
• MIC — + (increase) and – (decrease) microphone volume adjustment
• VOL — + (increase) and – (decrease) Master Audio ouput adjustment
• Talk Over — activate the microphone mixer for microphone talk over
• Mute — mute/unmute Master Audio output
• Blank — suppress the video/audio input to the selected A/V group
* The remaining buttons do not apply to the SWP123 operation.
 previous